A METAR is a compact observation of conditions at an airport, normally assembled in the same order: station, observation time, wind, visibility, present weather, cloud, temperature and dew point, pressure, then remarks. It describes what was observed near the station at a stated time. It is not a forecast and it is not a complete picture of the approach path.

Worked report

METAR KJFK 161851Z 18012G20KT 10SM -RA SCT020 BKN045 18/15 A2992 RMK AO2

At New York JFK on the 16th at 18:51 UTC, wind was from 180 degrees at 12 knots gusting 20, visibility was 10 statute miles, light rain was falling, scattered cloud was at 2,000 feet, broken cloud at 4,500 feet, temperature was 18 C, dew point 15 C, and altimeter setting 29.92 inches of mercury.

Read the fixed groups from left to right

KJFK is the four-letter ICAO station identifier; the JFK airport profile displays it beside the three-letter IATA code used on tickets. 161851Z means the observation was made on day 16 at 18:51 UTC; Z means Zulu time, another name for UTC. METARs do not include the month or year, so software and readers infer them from the surrounding date.

The wind group 18012G20KT says the wind came from 180 degrees true at 12 knots with gusts to 20. VRB replaces the direction when it is variable. A following group such as 150V220 gives the range through which the direction varied. Calm wind is 00000KT. This is measured surface wind, not the wind the aircraft will encounter at cruise altitude.

In a United States METAR, 10SM means prevailing visibility of ten statute miles. International reports often use meters, so 9999 means at least 10 kilometers rather than 9,999 meters exactly. Runway visual range groups begin with R, such as R04L/1200FT. RVR is a runway-specific instrument estimate and can matter even when the general visibility group looks better.

Decode present weather without guessing

Weather codes combine intensity, description and phenomenon. A leading minus means light, no sign means moderate, and a plus means heavy. RA is rain, SN snow, DZ drizzle, FG fog, BR mist, TS thunderstorm and FZ freezing. Therefore -RA is light rain, +TSRA is heavy rain with a thunderstorm, and FZDZ is freezing drizzle. The Aviation Weather Center product guide maintains the official element definitions.

A blank weather group does not mean the atmosphere is harmless. It means no reportable present-weather code was included at the station. Hazards can exist between reporting points, above the station, or after the observation time. This is one reason a METAR should not be treated as permission for a flight.

Cloud layers and the operational ceiling

Cloud amount codes are FEW, SCT, BKN and OVC, followed by height in hundreds of feet above the airport. SCT020 is scattered cloud at 2,000 feet; BKN045 is broken cloud at 4,500 feet. Only broken and overcast layers establish a ceiling. VV means vertical visibility when the sky is obscured. SKC or CLR reports no cloud under the applicable observing rules.

The difference matters. Scattered cloud at 500 feet is not a reported ceiling, while broken cloud at 500 feet is. Operational categories also combine ceiling with visibility. The NOAA Aviation Weather Center map labels stations VFR, MVFR, IFR or LIFR from those values, but airlines and crews use more specific limits for each approach and aircraft.

Temperature, dew point and pressure

18/15 gives temperature and dew point in Celsius. An M means minus, so M02/M05 is minus 2 C and minus 5 C. A small spread between temperature and dew point suggests the air is close to saturation, but it does not guarantee fog. Wind, incoming air, precipitation and local terrain can all change what happens next. For the forecast, move to the TAF change-group guide.

A2992 is the altimeter setting in inches of mercury: 29.92. Many countries instead publish QNH in hectopascals, such as Q1013. Pilots set this pressure so the altimeter indicates elevation correctly near the airport. A wrong setting shifts every indicated altitude, which is why controllers and automated broadcasts repeat it.

Remarks and the limits of one report

RMK begins national remarks. AO2 identifies an automated station able to distinguish precipitation types. Remarks may include sea-level pressure, exact temperature, rapidly changing pressure, lightning direction or when precipitation began. They are useful, but the format varies by country.

Before drawing a conclusion, check three boundaries: time, place and purpose. A METAR can already be nearly an hour old, it represents one airport rather than the entire route, and it is an observation rather than a forecast. Compare it with nearby stations, the TAF, radar and official advisories. On this site, the JFK airport page is useful for airfield context, but it is not an official weather briefing.

Special reports and automated observations

A routine report begins with METAR. A SPECI is an unscheduled special observation issued when specified conditions change, such as visibility, ceiling, wind or certain weather phenomena. A SPECI can therefore become more important than the routine report it follows. Always compare timestamps rather than assuming the report labeled METAR is the newest.

Many stations are automated. Automation provides consistent, frequent measurements but samples a limited point and cannot understand the sky the way a human observer can. A ceiling sensor looks upward through a small area and builds an estimate over time. A visibility sensor measures extinction in its sample volume. Conditions elsewhere on a large airport may differ. Remarks such as AO1 or AO2 identify station capabilities, while COR marks a corrected report.

AUTO after the time indicates a fully automated report under the applicable system. That does not make the data inferior, but it clarifies how it was produced. When a report contains ///// or missing groups, do not fill the gap with an assumption. The observation is incomplete for that element.

A second example with lower conditions

Consider METAR EGLL 162020Z 24018G30KT 4000 RA BKN008 OVC015 09/08 Q0996. London Heathrow reports wind from 240 degrees at 18 knots gusting 30, visibility 4,000 meters, rain, a broken layer at 800 feet, overcast at 1,500 feet, temperature 9 C, dew point 8 C and QNH 996 hPa. The broken 800-foot layer is the ceiling.

The report does not say whether a specific flight will land, which runway is active, or whether the rain will worsen. It does show a low ceiling, reduced visibility and gusty wind that deserve context from the TAF, runway configuration and operator minima. This is the correct stopping point for an educational decoder: translate what is present and identify what is missing.

Codes that change with reporting practice

CAVOK, used in many countries but not in routine United States METARs, means visibility, significant weather and cloud meet defined favorable criteria. It does not mean literally cloudless or unlimited visibility. NSC means no significant cloud under the applicable reporting rules, while NCD is an automated no-cloud-detected indication. Those phrases are not interchangeable with a guarantee of clear sky.

Some reports include recent weather, runway state or wind-shear information after the main body. National differences are why a decoder should preserve the original code rather than silently converting it into a simplified icon. If one group affects an operational decision, consult the issuing state's current documentation.

Finally, pressure and wind conventions can look inconsistent across apps because one display converts units or rounds values. Keep the raw METAR beside any translation. It is the audit trail that lets another reader verify whether 4,000 meant meters, whether A2992 was inches, and whether the timestamp was current.

Flight categories are a display summary

Many aviation maps color a station VFR, MVFR, IFR or LIFR from reported ceiling and visibility. Those categories are useful for scanning a region, but they are not a landing authorization and do not include every hazard. Strong wind, freezing precipitation or a nearby thunderstorm can matter while ceiling and visibility remain in a visual-flight category.

When the two inputs fall in different categories, the more restrictive one normally drives the displayed category. Read the underlying values before repeating the color. A map can also lag a new SPECI, and different services can refresh at different times.

This is the broader lesson of METAR decoding: keep the compact report connected to its measurement process, time and purpose. The code is precise about what it contains, but it does not contain the whole atmosphere.

A useful verification habit is to decode the report once without an app, then compare the result with an independent official display. If the translations disagree, inspect units, observation time and national conventions before choosing one. This catches consequential reading errors while preserving the original report as evidence.

Quick lookups

Does 9999 mean unlimited visibility?

No. In the international format it means visibility is 10 kilometers or more. Conditions beyond that threshold are not resolved by the group.

Are cloud heights above sea level?

No. METAR cloud bases are reported in hundreds of feet above the aerodrome level. Terrain away from the airport can therefore sit closer to the cloud than the report suggests.